Epson TOUCH DH200 - Manual (Page 89)

79
APPENDIX E: CONNECTING ADDITIONAL
EXTERNAL MONITORS
Use the Video port (BNC) on the rear panel of the system to use the Monitor Out function. Monitor
Out displays the exact on-screen display of the system.
Use the Spot port (BNC) to use the Spot Out function. Spot Out displays connected cameras on the
system.
NOTE: A BNC-to-RCA adapter (not included) is required to connect a monitor with RCA inputs.
To use spot out functions:
1. With a spot monitor connected, press the SPOT OUT button on
the remote control or Virtual Remote followed by the numeric
button for the channel you wish to view (full-screen).
2. Press the SPOT OUT button twice to begin Auto Sequence (by
default, Spot Out on the system is set to Auto Sequence).
When an alarm is triggered, Spot Out will display the triggered
channel in full-screen.
DVR
Monitor
(not included)
Spot Monitor
(not included)
Figure 43.0 Spot Out button