Epson TOUCH DH200 - Manual (Page 86)

76
Appendix D: Connecting PTZ Cameras
Using a PTZ Camera
To control a PTZ camera:
1. With your PTZ connected to the system, view the active PTZ channel
in full-screen.
2. Press PTZ button on the front panel, remote control, or Virtual
Remote (mouse only). The Short-cut Menu opens.
3. Press any of the buttons on the Short-Cut menu to open the PTZ
Help Menu.
The PTZ Help Menu contains the following:
Button Result/Action
ENTER button • Press to open the PTZ Help Menu; press again to close the
menu
ESC button • Press to cancel all PTZ operation
MENU button • Press to open the PTZ Virtual Remote; press
again to return to the Short-cut menu
Navigation buttons • Press
ST
to tilt up/down
• Press
WX
to pan left/right
Increase/Decrease
buttons • Press + / - to zoom in and out
Figure 42.1 PTZ Short-cut menu