Epson Equity Ie Q50188015-1 - Manual (Page 79)

Replacing the Cover
After you install (or remove) an option card, follow these steps to replace the
main unit’s cover:
1. With the front of the computer facing you, slide on the top cover as
shown in the following illustration.
2. Slide the cover straight back until the front panel is flush with the
diskette drive.
3. To secure the cover, replace the two screws on each side of the computer
and the three screws on the back panel.
4. Reconnect the main unit to the monitor, the keyboard, and any other
peripherals you have.
5. Check to be sure the power switch on the main unit is off. Then
reconnect the power cable to the back of the main unit and to an
electrical outlet.
A-6 Installing Option Cards