Run all above checks, Floppy disk drives and controller check, D-12 – Epson Equity Ie Q50188015-1 User Manual
Page 100: Is the display correct (y/n)
The colored screens are displayed in the order shown below:
1
Black
2
Blue
3 - G r e e n
4
Cyan
5
Red
6
Magenta
7
Brown
8
White
9
---Gray
10 Light blue
11
Light green
12 Light cyan
13
red
14 Light magenta
15 Yellow
16 White (high intensity)
When you get to the last screen, you see this prompt:
Is the display correct (Y/N)?
If all the colors or shades are correct, press Y and
Enter
to end the test. If
any color is displayed incorrectly, first check the adjustment of your monitor,
and then make sure that both ends of the cable are plugged in firmly. If a
problem still exists, press
N
and
Enter
to display the error message.
Run all above checks
To run all the tests on the menu in sequence, press 9 and
Enter.
When you choose this option, all video checks are performed automatically
in sequential order. Although you do not start each test, you must still
supply the appropriate responses to progress from one test to the next.
Floppy Disk Drives and Controller Check
Use this option to test the performance of the floppy disk (diskette) drives
installed in your computer. This test includes several checks that allow you
to identify particular problems related to your diskette drives.
To run these tests, you need a formatted 720KB diskette so the tests can
write data on the diskette in the drive.
D-12
Performing
System
Diagnostics