Epson Equity Ie Q50188015-1 - Manual (Page 77)

2. Unpack the option card and adjust any of its switches or jumper
connections, if necessary. (For example, a memory expansion card
usually contains DIP switches that you need to set.) See the instructions
that come with the option card.
When you handle the card, be careful not to touch any of the contacts
on the circuit board, especially the gold-edged connections. If you need
to set the card down, place it on top of its original packing material with
the component side facing down.
Keep the card’s packing materials in case you remove the card later.
3. Position yourself (or the computer) so that you are on the side of the
computer with the option slots. You should be facing the gold connector
slots inside the computer.
4. Hold the card by the corners opposite the gold metal pins. Make sure
the pins point toward the connector slot and the components face up.
The card’s metal mounting bracket should be on your left.
A-4
Option
Cards