Removing an option card, Installing option – Epson Equity Ie Q50188015-1 User Manual
Page 78
5. Insert the card in the slot as shown below. Make sure the card’s
mounting bracket aligns with the slot at the back of the computer.
6. Once the connector pins are sitting in the connector slot, push the card
firmly (but carefully) to fully insert it.
7. Secure the mounting bracket on the end of the card to the back of the
computer with the retaining screw you removed earlier.
Removing an Option Card
If you need to remove an option card, follow the steps below:
1. Remove the screw holding the option card’s mounting bracket and pull
the card toward you, out of the connector.
2. Carefully wrap the card, preferably with the original packing materials,
and place it inside its box for safe storage.
3. Replace the original metal cover in the empty option slot and secure it
with the retaining screw.
Installing Option
Cards
A-5