Epson Equity Ie Q50188015-1 - Manual (Page 46)

Turning Off the Computer
Before you turn off your computer, save your data, exit the program you
are using, and remove all diskettes from the diskette drives. Turn off your
monitor and peripherals first, and then turn off the main unit by pressing
the
POWER button on the front panel.
Moving the Computer
If you are going to move your computer (even to another part of the room),
you need to prepare your computer for moving. Follow these steps:
1.
2.
3.
If you have a hard disk, type HDSIT at the MS-DOS command prompt
and press Enter. (You must be in the directory that contains the
HDSITEXE file.)
Note
If you copied the Reference diskette files to the hard disk as described in
Chapter 2, the HDSITEXE file should already be on your hard disk.
You can also run the HDSIT utility by selecting Option 3,
Prepare
hard
disk
for moving,
from the main menu of the diagnostics
program. See Appendix D for instructions on starting the diagnostics
program.
Turn off all peripherals and then turn off the computer. Next, disconnect
all cables.
If you are moving the computer any distance outside of the current
location (such as to another building or city), repack the components
using the original box and packing materials.
Using the Equity Ie
3-11