Yaskawa V1000 Option Dual Port EtherNet/IP SI-EN3D/V Technical Manual - Manual (Page 9)

4 Option Components
u SI-EN3D/V Dual-Port EtherNet/IP Option Unit
A
B
C
H
E
D
H
G
I
J
R
F
Q
00000000000000
SI-EN3D/V
1XXX
P N K M
O L
Option with cover removed
Underside
Option with cover attached
A – LED (NS) <2>
B – LED (MS) <2>
C – Option cover
D – EtherNet/IP PCB
E – Attachment screw hole for option
cover
F – Nameplate
G – Functional earth cable connection
(FE)
H – Mounting tab
I – Ground wire
<1>
J – Pass-through hole for ground wire
K – Port 2 LED (10/100)
<2>
L – Port 2
M – Port 2 LED (LINK/ACT)
<2>
N – Port 1 LED (10/100) <2>
O – Port 1
P – Port 1 LED (LINK/ACT)
<2>
Q – EtherNet/IP cable connector
R – Option connector
Figure 1 Option Unit Components
<1> A selection of ground wires are packaged loose in the option shipping package. Connect the appropriate ground wire based on
drive model during installation.
<2> Refer to Option LED Display on page 11 for details on the LEDs.
u Dimensions
The installed option adds 27 mm (1.06 in.) to the total depth of the drive.
27 mm (1.06 in.)
Figure 2 Dimensions
4 Option Components
YASKAWA SIEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Technical Manual 9