Eds files, 5 installation procedure – Yaskawa V1000 Option Dual Port EtherNet/IP SI-EN3D/V Technical Manual User Manual
Page 19
V1000
M
U/T1
V/T2
W/T3
R/L1
S/L2
T/L3
SI-EN3D/V
EtherNet/IP
Option
FE
<1>
EtherNet/IP Cable
Motor
Power
EtherNet/IP Cable
Figure 20 Option Connection Diagram
15.
Use the second communication cable port to daisy chain a series of drives where applicable.
16.
Attach the option cover by aligning the tabs with the mounting holes, seat the front cover into place, and tighten the
screw on the front.
Line up tabs
Figure 21 Attach the Option Cover
Note:
Take proper precautions when wiring the option so that the front covers will easily fit back onto the drive. Make sure no cables
are pinched between the front covers and the drive when replacing the covers.
17.
for proper option performance.
u
EDS Files
For easy network implementation of drives equipped with the option, an EDS file can be obtained from:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
Note:
Download the option EDS file. The option will not function as a slave in the network without the appropriate EDS file.
5 Installation Procedure
YASKAWA SIEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Technical Manual
19