Yaskawa V1000 Option Dual Port EtherNet/IP SI-EN3D/V Technical Manual - Manual (Page 22)

<6> When F7-14 is set to 0 or 2, parameter F7-15 must be set.
<7> Default setting differs depending on drive software version. PRG: 1012 to 1015: 0
PRG: 1016 and later: 1
<8> Setting range differs depending on drive software version. PRG: 1012 to 1023, Range: 0 to 2
PRG: 1024 and later, Range: 0 to 8
<9> Setting values differ depending on drive software version. PRG: 1012 to 1015, Default: 0; Range: 0, 10, 100
PRG: 1016 to 1023, Default: 10; Range: 10, 100
PRG: 1024 and later, Default: 10; Range: 10; 100 to 102
Table 8 Option Monitors
No. Name Description Value Range
U6-80 to
U6-83
Online IP Address IP Address currently available; U6-80 is the most significant octet 0 to 255
U6-84 to
U6-87
Online Subnet Subnet currently available; U6-84 is the most significant octet 0 to 255
U6-88 to
U6-91
Online Gateway Gateway currently available; U6-88 is the most significant octet 0 to 255
U6-92 Online Speed Link Speed
10: 10 Mbps
100: 100 Mbps
U6-93 Online Duplex Duplex Setting 0: Half, 1: Full
U6-94 Port 2 Duplex Port 2 Duplex Setting 0: Half, 1: Full
U6-95 Port 2 Speed Port 2 Link Speed
10: 10 Mbps
100: 100 Mbps
U6-98 First Fault First Option Fault –
U6-99 Current Fault Current Option Fault –
6 Related Drive Parameters
22 YASKAWA SIEP YAICOM 15A V1000 Option Dual-Port EtherNet/IP SI-EN3D/V Technical Manual