SMA MATRIX - Manual (Page 62)

Maintenance and Care SMA Solar Technology AG
62 SMatrix-BEN095014 User Manual
4. Loosen the PG threaded joints on both cable feeds until the cable is moveable and the
connection box can flip downwards. Flip down the connection box.
5. loosen the screws in the terminals, to relieve the electricity cable.
6. Loosen the wires of the electricity cable with a slit screwdriver from the terminal strip.
7. Pull the electricity cable through the PG threaded joint from the connection box.
8. Guide the new electricity cable through the PG threaded joint.
9. Remove 50 mm of the cable cover.
10. Strip 8 mm off the insulated wires.