SMA MATRIX - Manual (Page 58)

Setings SMA Solar Technology AG
58 SMatrix-BEN095014 User Manual
8.9 Restoring factory settings (reset)
You can restore the factory settings of the Sunny Matrix using two methods which are described in
the following:
• User interface
• Reset button
User interface
1. Select "Settings > System".
2. In the "Sunny Matrix Software:" select [restore] in the "Factory Settings" field.
☑ A pop-up window opens.
3. Select [OK].
4. Close window.
☑ The Sunny Matrix has been reset to the factory settings. The Sunny Matrix restarts. This
procedure takes around 30 seconds.
All settings will be deleted!
After the reset, all settings of the Sunny Matrix are deleted, including the network settings,
the defined displays and the factory predefined standard slide show.
The Sunny Matrix is again reachable vial the factory settings after the reset:
• IP address: 192.168.0.169
• Subnet mask 255.255.255.0
• User name: sunnymatrix
• Password: sma
Save settings before the reset with the Sunny Matrix Admin Tool.
You can save the configuration of the Sunny Matrix using the Sunny Matrix Admin Tool
and after the reset again transfer to the Sunny Matrix.