5 deleting a slide show, 6 creating an empty slide show, 7 standard slide show (10) – SMA MATRIX User Manual
Page 44: 1 switching the standard slide show on / off, Deleting a slide show, Creating an empty slide show, Standard slide show (10), Switching the standard slide show on / off

Operation
SMA Solar Technology AG
44
SMatrix-BEN095014
User Manual
7.5 Deleting a slide show
1. Select "Display > Slide Show".
2. In the "Slide Show Overview:" area select [Delete] in the line of the slide show which is to be
deleted.
☑ The slide show has been deleted.
7.6 Creating an empty slide show
You can set that the Sunny Matrix should display nothing at a certain time. The display of the Sunny
Matrix then remains dark.
Proceed as follows to create an empty slide show:
1. Select "Display > Slide Show".
2. In the "Start Time" field enter the time in 24 hr format at which the slide show should start.
3. In the "Title" field enter the following word in upper case: NOSHOW.
4. Select [Save].
☑ The Sunny Matrix saves the setting. The "Display > Slide Show" page opens again.
☑ The empty slide show is created.
7.7 Standard slide show (10)
The slide show with the number 10 is the standard slide show. The Sunny Matrix displays the standard
slide show 10 automatically after 5 minutes if the contact to the Sunny WebBox is lost. This prevents
a blank display on the Sunny Matrix. The standard slide show is preset. If you want to change the
standard slide show, create the slide show from slides which do not display any data of the PV system.
Displays with text and the time are independent of the PV system.
7.7.1 Switching the Standard Slide Show on / off
1. Select "Settings > Network".
2. In the "WebBox Connection:" area select "On" or "Off" in the "Standard Slide Show:" field.
☑ The standard slide show is switched on or off.