SMA MATRIX - Manual (Page 11)

SMA Solar Technology AG The Sunny Matrix
User Manual SMatrix-BEN095014 11
New functions
The firmware version 2.10 of the Sunny Matrix contains the following new functions:
• The Sunny Matrix can retrieve data from up to 50 Sunny WebBox devices. The Sunny Matrix
adds the data of the Sunny WebBox devices.
– See section 6.4 ”Adding Sunny WebBox Devices” (page 32).
• 1 Sunny WebBox can be assigned as Master Sunny WebBox.
The Sunny Matrix can procure the date, time and environmental data of a Sunny SensorBox
and the charge state of a Sunny Island battery from the Master Sunny WebBox.
– See section 8.7.3 ”Assigning / changing Master Sunny WebBox” (page 55).
• The Sunny Matrix Admin Tool is available in the download area of www.SMA.de/en for the
saving of the Sunny Matrix configuration (Sunny WebBox connections, slides, slide shows etc.).
The Sunny Matrix Admin Tool can be installed in the Sunny Matrix from the firmware version
2.10 and above. You require the Sunny Matrix Admin Tool in order to be able to update the
Sunny Matrix firmware.
• The Sunny Matrix has a reset button.
– See section 8.9 ”Restoring factory settings (reset)” (page 58).
• A new start of the Sunny Matrix is possible via the user interface.
– See section 8.8 ”Restarting Sunny Matrix” (page 57).
• Instead of the IP address of a Sunny WebBox, a DNS address can also now be entered.
– See section 8.7.1 ”Add further Sunny WebBox devices” (page 54).
• The firmware version and the serial number are to be found on the lower right of the user
interface.
– See section 4.2 ”Identifying the Sunny Matrix” (page 15).
• The CO2-factor can be set within a range of 0.1 to 0.9.
2.3 System Requirements
• Web browser:
– Microsoft Internet Explorer 6, 7, 8
– Mozilla Firefox 2.0.02, 3.0.10
• Adobe Flash Player