SMA MATRIX - Manual (Page 49)

SMA Solar Technology AG Setings
User Manual SMatrix-BEN095014 49
8.5 Setting units
8.5.1 Changing measuring units
You can change the measurement units of the following values: Power, daily energy, total energy,
CO
2
saved.
1. Select "Settings > Format".
2. In the "Scaling" column, select the desired measurement unit..
3. Select [Save].
☑ The measurement units are changed.
8.5.2 Changing the number of decimal places
You can set how many decimal places the following values should display: Power, daily energy, CO
2
saving.
1. Select "Settings > Format".
2. In the "decimal places" column select the desired quantity.
3. Select [Save].
☑ The decimal places are changed.
8.5.3 Changing the CO
2
Factor
The Sunny Matrix can calculate how much CO
2
you avoid through the environmentally friendly
generation of electricity with your PV system. Therefore the Sunny Matrix needs the CO
2
factor. The
CO
2
factor is dependent on the electricity mix of the country. You can obtain the CO
2
factor from
your energy supplier.
1. Select "Settings > Format".
2. In the "Factor" column, select the factor.
3. Select [Save].
☑ The factor is changed.
CO
2
factor and electricity mix
You will find further information on the CO
2
factor and electricity mix in the download area
of www.SMA.de/en.