8 setings, 1 time settings, 1 selecting the time source – SMA MATRIX User Manual
Page 47: 2 setting date and time, 3 changing the time and date format, Setings, Time settings, Selecting the time source, Setting date and time, Changing the time and date format

SMA Solar Technology AG
Setings
User Manual
SMatrix-BEN095014
47
8 Setings
8.1 Time settings
8.1.1 Selecting the time source
The Sunny Matrix obtains the time from its internal real time clock. You can set that the Sunny Matrix
should obtain the time from the Master Sunny WeBox. This is first possible from the Sunny WebBox
firmware version 1.50.
How you establish a Sunny WebBox as Master is described in section 8.7.3 ”Assigning / changing
Master Sunny WebBox” (page 55).
1. Select "Settings > System".
2. In the "Time settings:" area activate "Time Source WebBox:"
3. Select [Save].
☑ The Sunny Matrix obtains the time from the Sunny WebBox.
8.1.2 Setting Date and Time
1. Select "Settings > System".
2. In the "Time settings:" area select [change] next to "Date and Time".
☑ A pop-up window opens.
3. Enter the date in the "Date:" field. Format DD.MM.YYYY or MM/DD/YYYY
4. Enter the time in 24 hr format in the "Time:" field. The time continues, as soon as you select
[change].
5. Select [change].
6. Select [Save].
☑ Data and time are set.
8.1.3 Changing the time and date format
You can set whether the Sunny Matrix should display the time in 12 hr or 24 hr format. You can select
between the following formats for the date: DD.MM.YYYY or MM/DD/YYYY
1. Select "Settings > Format".
2. In the "General:" area select the desired format in the "Time:" field.
3. Select the desired format in the "Date:" field.
4. Select [Save].
☑ The format of the time and date is changed.