SMA MATRIX - Manual (Page 17)

SMA Solar Technology AG Assembly
User Manual SMatrix-BEN095014 17
5.3 Mounting Methods
You can mount the Sunny Matrix to a wall with brackets or with clips. The difference between the
mounting methods is that you can affix the Sunny Matrix with the brackets not only vertically, but also
with a forward or backward tilt.
• Mounting with brackets, see section 5.3.1 ”Mounting the Sunny Matrix with Brackets”
(page 17).
• Mounting with clips, see section 5.3.2 ”Mounting the Sunny Matrix with Clips” (page 22).
5.3.1 Mounting the Sunny Matrix with Brackets
Mounting accessories provided
Fixing the Brackets to a wall
1. Select the mounting location taking into consideration the requirements for the mounting
location, as described in section 5.2 ”Requirements for the Mounting Location” (page 16).
2. With the help of one of the following diagrams, which relates to the dimensions of the Sunny
Matrix, determine the mounting area and mark the drill holes. Allow around 10 cm to the left
and right of the Sunny Matrix, in order that the Sunny Matrix can be grasped and hung up.
Position Number Name
A 2 Brackets
B 4 Hexagonal screws (10 mm x 100 mm)
C 4 Wall anchors
D 4 Washers