SMA MATRIX - Manual (Page 27)

SMA Solar Technology AG Commissioning
User Manual SMatrix-BEN095014 27
6 Commissioning
6.1 Information on Commissioning
6.2 Connecting the power supply
1. Insert the plug of the Sunny Matrix into a plug socket (100 V AC to 240 V AC).
☑ The Sunny Matrix starts and is accessible via the user interface after 1 minute.
2. Lay the cable properly so that there is no risk of persons tripping over it.
☑ The power supply is connected.
The electricity cable of the Sunny Matrix is not suitable for use outdoors.
The electricity cable supplied connected to the Sunny Matrix is not suitable for use
outdoors. If you mount the Sunny Matrix outdoors, you must replace the electricity cable
with one which is suitable for outdoor use. How to replace the electricity cable is described
in section 9.1.1 ”Replacing electricity cable” (page 61).
Settings in the network via the Network Administrator.
If your network is managed by a Network Administrator, contact him in order that he can
integrate the Sunny Matrix into the network.