SMA MATRIX - Manual (Page 41)

SMA Solar Technology AG Operation
User Manual SMatrix-BEN095014 41
2. In the "Select a Slide Show" area, click a button for the save location of the slide show. Do not
select the button with the number 10, this is assigned to the Standard Slide Show, if it is
activated.
☑ Alongside "current selection:" the number of the selected button appears, under which the
slide show will be saved.
3. In the "Slide:" area select the desired slide from the drop down menu. Only the created slides
are selectable.
4. Activate the field in the "Slide:" area.
5. In the "Duration in Seconds:" area enter how many seconds the slide should be displayed for.
In a display duration of 0 seconds is entered, the slide is displayed permanently. With this
setting, the Sunny Matrix does not change to the next slide. This setting is sensible if the slide
show only contains 1 slide. This avoids a flickering of the display at the end of the display
duration.
6. If desired, in this way you can select and activate further slides and set the duration.
7. In the "Start Time" field enter the time in 24 hr format at which the slide show should start.
8. In the "Title" field enter a title for the slide show if desired.
The Title helps to differentiate between various slide shows. In the "Slide Show Overview:" area
all saved slide shows are listed.
9. Select [Save].
☑ The Sunny Matrix saves the setting. The "Display > Slide Show" page opens again.
☑ The slide show has been created.
On the start page of the Sunny Matrix you can access a preview of the current slide show, as
described in section 7.3 ”Viewing the preview of the current slide show” (page 43).
Saving settings with the Sunny Matrix Admin Tool.
Using the Sunny Matrix Admin Tool you can save the Sunny Matrix configuration onto the
computer and when necessary reload onto the Sunny Matrix.