SMA SC 500CP-US User Manual
SMA Equipment
This manual is related to the following products:
Table of contents
Document Outline
- 1 Information on this Document
- 2 Safety
- 3 Product Description
- 4 Scope of Delivery
- 5 Storage
- 6 Preparation for Installation
- 7 Transporting the Inverter
- 7.1 Safety Precautions for Transport
- 7.2 Center of Gravity of the Inverter
- 7.3 Mounting the Rear Kick Plates for Installation in Electrical Equipment Rooms
- 7.4 Transporting the Inverter Using a Crane Fork
- 7.5 Transporting the Inverter Using a Forklift Truck
- 7.6 Transporting the Inverter Using a Pallet Truck
- 7.7 Transporting the Inverter Using a Crane
- 8 Installation of the Inverter
- 9 Grounding Connection
- 10 DC Connection
- 11 AC Connection
- 12 Cable Connection of External Devices in the Interface Cabinet
- 12.1 Connection Area
- 12.2 Cable Requirements
- 12.3 Switching off the Circuit Breaker
- 12.4 Inserting the Cables into the Interface Cabinet
- 12.5 Connecting the Remote Shutdown
- 12.6 Connecting the External Setpoint Specification
- 12.7 Connecting the Transformer Protection
- 12.8 Connecting the External Voltage Supply (Optional)
- 12.9 Insulation Monitoring
- 12.10 Connecting the External Fast Stop
- 12.11 External AC Power Contactor Monitoring
- 13 Installing the DC Fuses
- 14 Disconnecting the Inverter
- 15 Setting up a Plant Network
- 16 Commissioning
- 17 Technical Data
- 17.1 Measurement Accuracy
- 17.2 Sunny Central 500CP-US/CA
- 17.3 Sunny Central 500CP-US/CA 600V
- 17.4 Sunny Central 630CP-US/CA
- 17.5 Sunny Central 720CP-US/CA
- 17.6 Sunny Central 750CP-US/CA
- 17.7 Sunny Central 800CP-US/CA
- 17.8 Sunny Central 850CP-US/CA
- 17.9 Sunny Central 900CP-US/CA
- 17.10 Integrated AC Disconnect
- 18 Contact
- 19 Revision History