SMA SC 500CP-US - Manual (Page 54)

8 Installation of the Inverter SMA America, LLC
54 SCCP-US-IA-US_en-41 Installation Manual
7. Unscrew the grounding strap of the side panel.
8. Remove the panel and store the screws safely.
8.3 Mounting the Ventilation Plate
The guide rails for the ventilation plate can be found in the base area of the inverter cabinet.
Figure 26: Position of the guide rails for the ventilation plate
/05*$&
Damage to the inverter or transformer due to overheating
Inverters or transformers can overheat and be damaged due to the drawing-in of exhaust air from other inverters.
• Install the plant in such a way that the inverter or the transformer cannot draw in any exhaust air from other devices.
• Follow the supply air and exhaust air requirements (see Section 6.2.2 "Supply Air and Exhaust Air", page 33)