SMA SC 500CP-US - Manual (Page 55)

SMA America, LLC 8 Installation of the Inverter
Installation Manual SCCP-US-IA-US_en-41 55
Procedure:
• Push the ventilation plate into the inverter cabinet. The ventilation
grid is facing the rear panel.
☑ The ventilation grid is flush with the inverter enclosure.
✖ The ventilation plate does not go all the way in?
• Grasp the ventilation plate from underneath and press
upwards in the middle while pushing it in.
8.4 Mounting the Base Braces
The base braces are in the floor area of the interface cabinet. You must mount the base braces so that the cable can be
easily connected.
1. Loosen the base braces.
2. Position the base braces.
3. Screw on the base braces tightly.
4. If you are not carrying out the electrical connection immediately, mount the panels of the connection area (see
Section 16.8).
5. Close and lock the inverter.