SMA SC 500CP-US User Manual
Page 47

SMA America, LLC
7 Transporting the Inverter
Installation Manual
SCCP-US-IA-US_en-41
47
Procedure:
1. Release the screws of the right-hand ventilation grid.
2. Pull the lower side of the right-hand ventilation grid forwards. This
is how you remove the ventilation grid.
3. Loosen the screws of the left-hand ventilation grid.
4. Pull the lower side of the left-hand ventilation grid forwards. This is
how you remove the ventilation grid.
/05*$&
Damage to the inverter due to non-compliance with the grounding strap requirement
The roof and switch cabinet of the inverter are connected with a grounding strap. If the roof is removed without due
care, the grounding strap could rip and the inverter be damaged.
• Make sure that the grounding strap is not damaged when the roof is removed.
• Unscrew the grounding strap before you remove the roof from the inverter.
• Avoid fast, jerky movements when dismantling the roof.