HEIDENHAIN iTNC 530 (606 42x-02) ISO programming - Manual (Page 630)

630 Industrial PC 6341 with Windows 7 (Option)
1
9
.1 Intr
oduction
19.1 Introduction
Functionality
With the HEIDENHAIN IPC 6341 Windows computer you can start
and remotely operate Windows-based applications via the iTNC user
interface. The user interface is displayed on the control screen.
Since Windows runs on a separate computer, it does not influence the
NC machining process. The Windows computer is connected to the
TNC main computer via Ethernet.
Specifications of the IPC 6341
The software option 133 must be enabled in order to be
able to operate a Windows computer unit via the TNC.
The IPC 6341 is usually mounted in the electrical cabinet
of your machine tool. It is configured and commissioned
by your machine tool builder. The TNC is also configured
by your machine tool builder; see your machine tool
manual.
Specifications
Processor Pentium Dual Core with 2.2 GHz
RAM 2 GB
Hard disk memory 160 GB, of which 140 GB are available
Interfaces „ 2 x Ethernet 100BaseT
„ 2 x USB 2.0
„ 1 x RS-232C