HEIDENHAIN iTNC 530 (606 42x-02) ISO programming - Manual (Page 178)

178 Programming: Tools
5.2 T
ool D
a
ta
Leaving the tool table
U Call the file manager and select a file of a different type, such as a
part program
Move to end of line
Copy highlighted field
Insert copied field
Add the entered number of lines (tools) at the
end of the table
Insert a line for the indexed tool number after the
active line. The function is only active if you are
permitted to store multiple compensation data
for a tool (MP7262 not equal to 0). The TNC
inserts a copy of the tool data after the last
available index and increases the index by 1.
Application: e.g. stepped drill with more than one
length compensation value
Delete current line (tool): The TNC will then
delete the content of the line in the table. If the
tool to be deleted has been entered in the pocket
table, the behavior of this function depends on
MP 7263 (see “List of general user parameters”
on page 599)
Display / Do not display pocket numbers
Display all tools / only those tools that are stored
in the pocket table
Search tool table for tool name of selected tool.
The TNC shows the list with identical names in a
pop-up window if it finds a tool with an identical
name. Double-click the relevant tool in the
window or select it using the arrow keys, confirm
with the ENT key and the TNC highlights the
selected tool
Editing functions for tool tables Soft key