beautypg.com

Magnifying details, 1 gr aphics – HEIDENHAIN iTNC 530 (606 42x-02) ISO programming User Manual

Page 535

background image

HEIDENHAIN iTNC 530

535

16.1 Gr

aphics

Magnifying details

You can magnify details in all display modes in the Test Run mode and
a Program Run mode.

The graphic simulation or the program run, respectively, must first
have been stopped. A detail magnification is always effective in all
display modes.

Changing the detail magnification

The soft keys are listed in the table

U

Interrupt the graphic simulation, if necessary

U

Shift the soft-key row in the Test Run mode, or in a Program Run
mode, respectively, until the soft key for detail enlargement appears

U

Shift the soft-key row until the soft-key for the detail

magnification functions appears

U

Select the functions for detail magnification

U

Press the corresponding soft key to select the

workpiece surface (see table below)

U

To reduce or magnify the workpiece blank, press and

hold the MINUS or PLUS soft key, respectively

U

Restart the test run or program run by pressing the

START soft key (RESET + START returns the
workpiece blank to its original state).

Function

Soft keys

Select the left/right workpiece surface

Select the front/back workpiece surface

Select the top/bottom workpiece surface

Shift the sectional plane to reduce or
magnify the workpiece blank

Select the isolated detail