HEIDENHAIN ND 1200R - Manual (Page 78)

78 2 Installation and Specifications
2.3 Sof
tw
a
re
set
u
p  Highlight the specific function and press the ENTER key to complete
the assignment. In this example the Zero 2 function is assigned to
foot switch 2. After the assignment, pressing foot switch 2 will zero
the X and Y axes.
 Press the FINISH key to return to the setup menu.
The functions contained in the Special menu are shown here:
Highlight a specific function to assign Press the ENTER key to complete the
assignment
Special menu function Description
DMS/DD Toggles the display of angles between degrees, minutes and seconds and decimal degrees.
Zero 2 Zeroes the X and Y axes
Send X Sends the current X-axis data to a printer or computer.
Send Y Sends the current Y-axis data to a printer or computer.
Send Z Sends the current Z-axis data to a printer or computer.
Send D Sends the current diameter data to a printer or computer.
Send 2, 3, 4 Sends the current X-Y, X-Y-Z or X-Y-Z-D axes data to a printer or computer.
Clr Datums Clears the datums
MCS Clears datums and reestablishes machine coordinates.