HEIDENHAIN ND 1200R - Manual (Page 20)

20 1 Operation
1
.2 Basic F
unctions of the
N
D
120
0R
DATUM menu DATUM functions
Press the DATUM soft key
to display soft key
selections for zeroing,
moving and skewing the
datum. Soft keys include:
Probe Press the PROBE soft key
to enter the probe diameter
using the numeric keypad.
Zero Press the ZERO soft key to
select an axis, axes or hole
for zeroing the datum.
Move 0 Press the MOVE 0 soft key
to move the datum to a
new location.
Skew Press the SKEW soft key to
compensate electronically
for non-square part
alignment on the primary
axis.