HEIDENHAIN ND 1200R - Manual (Page 38)

38 1 Operation
1
.5 T
a
rg
et pat
ter
ns
Frame pattern
To create a Frame pattern:
 Press MENU>PATTERN>FRAME.
 Use the UP and DOWN ARROW keys to navigate between
parameter data fields and enter the parameter values required for
the pattern.
 Press the FINISH key. The targets in the pattern are added to the
Target list and the Current Position screen is shown.
 Press the FINISH key again to navigate to the first target in the
pattern.
Frame pattern screen
Frame pattern
Y
X
A
XD
YD
Parameter Description
Start X X axis coordinate for the center of the
first hole in the pattern.
Start Y Y axis coordinate for the center of the
first hole in the pattern.
Num of Col Number of columns in the pattern.
Num of Row Number of rows in the pattern.
X Distance Distance between the center of each
hole along the X axis prior to an angle
being applied to the pattern.
Y Distance Distance between the center of each
hole along the Y axis prior to an angle
being applied to the pattern.
Angle of Array Angle applied to the pattern in relation to
the X axis.
Drill Diameter Diameter of the drill.