HEIDENHAIN ND 1200R - Manual (Page 7)

ND 1200R Radial 7
Safety considerations
General accepted safety precautions must be followed when
operating the system. Failure to observe these precautions could
result in damage to the equipment, or injury to personnel. It is
understood that safety rules within individual companies vary. If a
conflict exists between the material contained in this manual and the
rules of a company using this system, the more stringent rules should
take precedence.
ND 1200R measurement axes
The ND 1200R DRO can display 2 or 3 axes depending on the model
purchased. DRO screen images used throughout this manual show
different numbers of axes and are for illustration only.
Software version
The software version is shown in the About setup screen discussed
later in chapter 2.
Cleaning
Use only a cloth dampened with water and a mild detergent for
cleaning the exterior surfaces. Never use abrasive cleaners, and never
use strong detergents or solvents. Only dampen the cloth, do not use
a cleaning cloth that is dripping wet.
The ND 1200R is equipped with a 3-wire power plug that
includes a separate ground connection. Always connect
the power plug to a 3-wire grounded outlet. Use of 2-wire
power plug adapters or any other connection accessories
that remove the third grounded connection create a safety
hazard and should not be permitted.
Unplug the ND 1200R from the power outlet and seek the
assistance of a qualified service technician if:
 The power cord is frayed or damaged or the power plug
is damaged
 Liquid is spilled or splashed onto the enclosure
 The ND 1200R has been dropped or the exterior has
been damaged
 The ND 1200R exhibits degraded performance or
indicates a need for service some other way