And below with no mpeg, Table 17, Selecting a board location – Grass Valley Profile Family Audio Signal Processing Board User Manual
Page 75

Selecting a Board Location
ASPB Installation
75
Table 17. Board I/O requirements and restrictions for PDR200 B029999 and below with no MPEG
Board Video
Router
Connection 
Requirements 
Recommended 
Slots
Other 
Possible 
Slots 
Comments
Inputs
Outputs
CPU
n/a
n/a
J1
None
Reserved for PC card only
VGA
n/a
n/a
J2
None
ISA only
LAN
n/a
n/a
J3
None
EISA only
SCSI
n/a
n/a
J4
None
EISA only
RefGen
n/a
n/a
J16
None
Reference genlock
RS-422
n/a
n/a
J17
None
EISA only
Master EDR
2
2
J9
J5-J15
Must be adjacent to Slave EDR and Fibre 
Channel (if installed). PCI Interconnect 
required. 
Slave EDR
2
2
J10
J5-J15
Must be adjacent to Master EDR. PCI 
Interconnect required. 
Analog 
Composite In
None
1
J15, J7
J5-J15
Any open slot if board in adjacent slot does 
not use the same shared router points. 
Must be adjacent to the Analog Composite 
Decoder.
Analog 
Composite 
Decoder 
None
None
J14, J6
J4-J15
Must be adjacent to Analog Composite In. 
May be installed in J4 since it does not 
require any router connections.
Four Channel 
Analog Out
4
None
J12
J6, J7, J11 Only J6, J7, J11, and J12 have 4 (or more)
inputs. If in J11 or J12, board must be able 
to get a shared input (the 4th) from an 
adjacent slot (J10 or J13).
Analog 
Composite 
Monitor Out
4
None
J12
J6, J7, J11 Only J6, J7, J11, and J12 have 4 (or more)
inputs. If in J11 or J12, board must be able 
to get a shared input (the 4th) from an 
adjacent slot (J10 or J13).
Analog 
Composite I/O
2
2
J14, J15
J5-J15
Any open slot if board in adjacent slot does 
not use the same shared router points.
Serial Digital I/O
2
2
J14, J15
J5-J15
Any open slot if board in adjacent slot does 
not use the same shared router points.
Cables must be able to reach ASPBs.
CAV In
None
1
J6
J5-J15
Any open slot if board in adjacent slot does 
not use the same shared router points.
Fibre Channel
None
None
J8
J5-J15
Must be adjacent to Master EDR. PCI 
Interconnect required. 
Mix Effects
6
2
J7
J6
Only J6 and J7 have 5 inputs; board must 
be able to get a shared input (the 6th) from 
an adjacent slot (J5 or J8).
Audio Signal 
Processing 
Board (ASPB)
None
None
J13 (1st)
J5 (2nd)
J5-J15
Cables must be able to reach video boards 
or additional ASPB. Second ASPB 
necessary for 32 channels of audio. 
