Grass Valley Profile Family Audio Signal Processing Board - Manual (Page 69)

Verifying the Installation
ASPB Installation 69
Verifying the Installation
Now that the unit is reassembled and the interface chassis is attached (if required),
you are ready to verify installation of the ASPB.
Verification for installation of the ASPB board consists of:
• Using Configuration Manager to see if the system recognizes the newly
installed boards. For instructions, see Using Configuration Manager to
Verify Boards on this page.
• Using VdrPanel to verify that you can configure video and audio resources,
and then record and play on all available channels. This will help detect any
problems with the ASPB, video boards and/or Sharcnet cabling for audio.
For information on configuring VdrPanel, as well as recording and playing
clips, see the chapter on VdrPanel in the Profile Family User Manual.
Using Configuration Manager to Verify Boards
You can use the Profile configuration software, called Configuration Manager, to
verify the presence of ASPB board.
To check for recognition of the ASPB boards:
1. Apply power to the Profile system.
2. From the Windows NT 4.0 desktop, start the Configuration Manager
application by choosing Start | Programs | PDR Applications | Configuration
Manager .
3. Look at the bottom of the Configuration Manager window to ensure
that Aud I/O Digital appears in the slots where you have ASPBs installed.
(See Figure 26.)
4. You will need to configure several aspects of how the ASPB and the rest of
the Profile audio system operates. See the instructions on configuring the
audio system in the chapter on Configuration Manager in the Profile Family
User Manual.
5. This completes the ASPB installation procedure.