Grass Valley Profile Family Audio Signal Processing Board - Manual (Page 14)

ASPB Installation
14 ASPB Installation
Verifying System Requirements
Use the following information to determine if your unit has the correct software
and hardware installed for this upgrade.
Profile System Software
You may need to upgrade the Profile system software to complete this upgrade.
Follow this procedure to check the software version installed on the Profile system
and then refer to Table 1.
1. Open the VdrPanel application.
2. Choose Help | About VdrPanel .
3. The software version is listed in the Product Version field in the displayed
window.
4. Refer to Table 1 below for system software requirements and then perform
a software upgrade if necessary.
NOTE: To obtain software and software release notes in order to complete the
upgrade, contact your Grass Valley Group representative.
Table 1. System software requirements for ASPB upgrade
Product Name Required Software
Version
PDR200 or
PDR300 2.4 or greater
PDR100 2.2