beautypg.com

Backplanes, Video backplanes, Introduction – Grass Valley NV5128 v.2.5 User Manual

Page 23: Used for machine control signals. • bnc connectors, Module slots and rear connectors

background image

NV5128 Multi-Format Router • User’s Guide

13

2. Introduction

Module Slots and Rear Connectors

Backplanes

The NV5128 features rear backplanes that can be inter-mixed in a single router frame, as shown in
Figure 2-4 on page 12.

The type of signal being received or distributed determines the backplane used (see

Backplane

Types and Signals

on page 14). For each backplane installed a corresponding input card or output

card must also be installed. For example, if a backplane is installed to receive AES unbalanced sig-
nals, then the input card capable of routing AES unbalanced signals must be installed in the corre-
sponding card slot (see

Active Cards

on page 21).

Video Backplanes

Unlike other backplanes, the backplanes for incoming and outgoing SWB signals and incoming SD
signals have active components. These backplanes cannot be used with analog video cards.

Figure 2-5. Backplanes

Each backplane contains connectors for
receiving or distributing signals. The
number of connectors on a backplane
and the type of connector is determined
by the type of signal. Figure 2-5 shows
the four types of connectors available on
backplanes.

There are five types of backplanes. All
backplanes are passive unless otherwise
noted:

• DB25 connectors

Used for analog

audio signals.

• Phoenix connectors

Used for AES

balanced signals and SMPTE longi-
tudinal time code signals.

• RJ45 connectors

Used for machine

control signals.

• BNC connectors

Used for analog

video and AES unbalanced audio sig-
nals.

• BNC connectors (active)

Used for

incoming and outgoing SWB signals
and for incoming SD signals.

Important

The two backplanes containing BNC connectors are not interchangeable. The
BNC backplane for SD and SWB signals are active and can not be used for ana-
log video or AES audio signals.

SDI

OUTPUT

SDI

OUTPUT

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

PORT 16

1-4

5-8

9-12

13-16

PORT 16

AES / TC

16 INPUT

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

AES/TC

INPUT

+

–
S

ANALOG

AUDIO

INPUT

ANALOG

AUDIO INPUT

1-4

STEREO

5-8

STEREO

9-12

STEREO

13-16

STEREO

DB25
Connectors

Phoenix
Connectors

RJ_45
Connectors

BNC
Connectors

This manual is related to the following products: