Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 91)

25 May 2004 NewsBrowse Installation and Configuration Guide 91
Test: Sequential encoder + Server stage
You can define three sequential encoder rules for each Profile bin the NewsBrowse
system monitors. To ensure consistency, for each bin, add all three rules.
The following table maps the sequential encoder rules and provides an example text
string for each rule, as appears in the Existing Rules box when the rule is added.
Refer to “Configure Rules Automation: ISS” on page 81 for ISS rules.
Test: Sequential encoder + Server stage
The following test exercises system functionality exclusive to the basic
configurations for the Sequential encoder + Server stage. A successful test verifies
that the basic configurations are correct.
Test description: Trigger rules by creating/modifying a clip on a Profile Media server
while the Rules Wizard service is off, then on.
Run the test as follows:
1. Make sure that the NewsBrowse system is not in use.
2. Make sure the Thomson Rules Wizard service is off on the NewsBrowse server.
3. Start the Thomson Resolver service and the Thomson Metadata service on the
NewsBrowse server.
4. Click Start | Programs | Thomson | Event Viewer to open Event Viewer.
5. On a Profile Media Server, copy a clip into a bin monitored by the sequential
encoder.
6. On the NewsBrowse server, start the Thomson Rules Wizard. Watch Event Viewer
and verify that the MPEG asset is created for the clip.
7. On the Profile Media Server, copy another clip into the bin. Watch Event Viewer
and verify that the MPEG proxy asset is created for the clip.
8. On the Profile Media Server, modify a clip (rename) in the bin. Watch Event
Viewer and verify that the MPEG proxy asset is created for the modified clip.
Create Proxy
MPEG if Profile
movie… For movies in bin SCAV1, Profile 1 For movies in bin SCAV2, Profile 2
…exists when
Rules Wizard
Starts up CreateIfSourceExist Source:DEFAULTDOMAIN/
PROFILE1/EXT:/SCAV1/*,video/profile.cmf
Destination:DEFAULTDOMAIN/PROXY1/*/*,video/
proxy.mpeg Priority:Normal CreateIfSourceExist Source:DEFAULTDOMAIN/
PROFILE2/EXT:/SCAV2/*,video/profile.cmf
Destination:DEFAULTDOMAIN/PROXY1/*/*,video/
proxy.mpeg Priority:Normal
…is created CreateIfSourceIsCreatedClosed
Source:DEFAULTDOMAIN/PROFILE1/EXT:/SCAV1/
*,video/profile.cmf Destination:DEFAULTDOMAIN/
PROXY1/*/*,video/proxy.mpeg Priority:Normal CreateIfSourceIsCreatedClosed
Source:DEFAULTDOMAIN/PROFILE2/EXT:/SCAV2/
*,video/profile.cmf Destination:DEFAULTDOMAIN/
PROXY1/*/*,video/proxy.mpeg Priority:Normal
…has its
content
modified CreateIfSourceContentIsModifiedClosed
Source:DEFAULTDOMAIN/PROFILE1/EXT:/SCAV1/
*,video/profile.cmf Destination:DEFAULTDOMAIN/
PROXY1/*/*,video/proxy.mpeg Priority:Normal CreateIfSourceContentIsModifiedClosed
Source:DEFAULTDOMAIN/PROFILE2/EXT:/SCAV2/
*,video/profile.cmf Destination:DEFAULTDOMAIN/
PROXY1/*/*,video/proxy.mpeg Priority:Normal