Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 89)

25 May 2004 NewsBrowse Installation and Configuration Guide 89
Sequential encoder + Server stage
Sequential encoder + Server stage
For this configuration stage you configure the NewsBrowse server to work together
with the sequential encoder, NAS, and Profile Media Server from the sequential
encoder stand-alone stage. MDI services are also required, as configured in the MDI
stage.
The portion of the NewsBrowse system configured and tested in this stage is
illustrated by the following diagram.
Refer to “Two tier system diagram” on page 16 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of the sequential encoder plus server, do the
following:
1. “Configure Media Frame Core ASK: Sequential encoder” on page 89
2. “Configure Rules Automation: Sequential encoder” on page 90
3. “Test: Sequential encoder + Server stage” on page 91
4. “Checklist: Sequential encoder + Server stage” on page 92
Configure Media Frame Core ASK: Sequential encoder
Make sure the sequential encoder’s Proxy Transfer service is registered with the ASK
software component as a “Transfer” device, as explained in
“Configure Media Frame
Core ASK: Register components” on page 47 .
mpg
NewsBrowse Server
Sequential
Encoder
Production Network
MDI Server
mpg info
info info
AV TC
AV
TC
Network Attached
Storage
clk
D to A
Video
Server