Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 49)

25 May 2004 NewsBrowse Installation and Configuration Guide 49
Encoder stand-alone stage
Encoder stand-alone stage
For this configuration stage you configure and test one single-channel encoder, one
NAS, and one Profile XP server to work together.
The portion of the NewsBrowse system configured and tested in this stage is
illustrated by the following diagram.
Refer to “Two tier system diagram” on page 16 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of a single-channel encoder, do the
following:
1. “Configure ASK Location: Single-channel encoder” on page 50
2. “Configure Ingest Control: Single-channel encoder” on page 50
3. “Configure Proxy Asset (NAS): Single-channel encoder” on page 51
4. “Configure media server: Single-channel encoder” on page 52
5. “Configure MPEG encoder: Single-channel encoder” on page 53
6. “Test: Encoder stand-alone stage” on page 53
7. “Checklist: Encoder stand-alone stage” on page 55