Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 125)

25 May 2004 NewsBrowse Installation and Configuration Guide 125
Chapter
5
Troubleshooting the NewsBrowse sys-
tem
Troubleshooting tools
Troubleshooting utilities can be found on NewsBrowse machines in the Windows
menu
Start | Programs | Thomson | NewsBrowse | Diagnostic Tools .
LogViewer — This utility is available on all NewsBrowse machines and provides a
log of information and errors for services running on that particular device.
Timecode Check — This is a utility provided on encoders that will display the
timecode being fed into the Adrienne timecode board. This is valuable for checking
that house time is being read when setting up a single-channel encoder. No
NewsBrowse services should be running when using this utility.
Asset System Client — This utility on the MDI server provides a view of the events
generated by Managed Device Interface services configured in the system. Refer to
“Test: MDI stage” on page 61 .
Remoting Host Controller — This utility on the MDI server manages Profile
Managed Device processes. Refer to
“Test: MDI stage” on page 61 .
Ingest Client — This encoder utility exercises a single-channel encoder to test the
ability to encode mpeg and initiate record on the high-res video server. Refer to
“Test:
Encoder stand-alone stage” on page 53 .
Transfer Client — This encoder utility is used to test scavenge and transcode
operations. Refer to
“Test: ISS stand-alone stage” on page 77 and “Test: Sequential
encoder stand-alone stage” on page 87 .
Router Gateway Client — This utility allows you to test the connection between the
Router Gateway and the router control system. Refer to
“Test: Router Gateway
stand-alone stage” on page 70 .
Configuration Tool — This tool can check network connectivity (ping) from the
NewsBrowse server to all the machines in the NewsBrowse system. Open the
configuration tool on the NewsBrowse server at
Start | Thomson | NewsBrowse |
Utilities .