Establish conventions, Machine naming convention, Channel naming convention – Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 User Manual
Page 31

25 May 2004
NewsBrowse Installation and Configuration Guide
31
Establish conventions
Establish conventions
The following conventions are recommended to make your NewsBrowse system
easier to work on and understand. Refer to these sections as necessary as you
configure your system.
Machine naming convention
Choose a root name (based on the site, etc.) and use the following convention for
naming machines.
Channel naming convention
In general, channel counting begins at one (not zero), with the first channel assigned
to the first channel in the first Profile in the system. Keep channel names short, as they
need to fit across the Ingest Schedule pages. Here's an example for an Open SAN
system using MPVS1104:
With this naming convention, if there is a problem, you can use the channel number
to quickly determine which encoder and which Profile are affected.
Machine type
Name
NewsBrowse server
root_nb_svr
Network Attached Storage (NAS)
root_nb_nas_1…n
Managed Device Interface (MDI) Server
root_nb_mdi
Single-channel encoder
root_nb_enc_1…n
Sequential (scavenge) Encoder
root_nb_seq_1…n
Image Support Server (ISS)
root_nb_iss_1…n
Live monitor encoder
root_nb_live_1…n
Router Gateway
root_nb_rtr
Stand-alone Profile Media Server
pvs_1…n
Open SAN Profile Media Server
mpvs_1…n
NewsBrowse Encoder
Channel Name
Profile Channel
root_nb_enc_1
Ch1
Profile 1, VTR 1
root_nb_enc_2
Ch2
Profile 1, VTR 2
root_nb_enc_3
Ch3
Profile 1, VTR 3
root_nb_enc_4
Ch4
Profile 1, VTR 4
root_nb_enc_5
Ch5
Profile 2, VTR 1
root_nb_enc_6
Ch6
Profile 2, VTR 2
…
…
…