Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 37)

25 May 2004 NewsBrowse Installation and Configuration Guide 37
Configure network settings on Production network machines
192.168.30.27 nb_enc_2 #Open SAN Profile mpvs_1 vtr 02
192.168.30.28 nb_enc_3 #Open SAN Profile mpvs_1 vtr 03
192.168.30.29 nb_enc_4 #Open SAN Profile mpvs_1 vtr 04
#NewsBrowse sequential encoders
#192.168.30.80 nb_seq_1
192.168.30.81 nb_seq_2
#NewsBrowse MDI server
192.168.30.101 iron_nb_mdi
#NB Router Gateway
192.168.30.111 iron_nb_rtr
#The following Client LAN entries are included in this host table for
#reference only. Machines on client network use DNS lookup only.
#NewsBrowse live monitor encoder
10.16.37.91 iron_nb_live_1 #Client LAN
10.16.37.92 iron_nb_live_2 #Client LAN
#NewsBrowse Ethernet Switch
10.16.37.20 iron_nb_2950-client_1 #Client LAN
192.168.30.200 iron_nb_2950-prod_1
Host table tips:
• The NAS and NewsBrowse server IP address need to be resolved using the Client
side IP address via DNS lookup, not the host table.
• If the server has a canonical name, the host table for any machine that runs MDIs
that are subscribed to by the server must match case for the entire canonical name.
E.g., if the server’s canonical name is “NB-SERVER1.mycorp.net”, then the host
table entry in the MDI server(s) must match; if the entry is
“NB-SERVER1.MYCORP.NET”, then it will not work. Pinging will not show the
problem. The problem doesn’t show up until the MDIs attempt to notify the server.
Configure network settings on Production network machines
Use the instructions in this section to configure Production network machines, which
are all those of the following types:
• Single-channel encoder
• Sequential (Scavenge) Encoder