Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 80)

80 NewsBrowse Installation and Configuration Guide 25 May 2004
Chapter 3 Configuring the NewsBrowse System
ISS + Server stage
For this configuration stage you configure the NewsBrowse server to work together
with the Image Support Server and NAS from the ISS stand-alone stage. MDI services
are also required, as configured in the MDI stage.
The portion of the NewsBrowse system configured and tested in this stage is
illustrated by the following diagram.
Refer to “Two tier system diagram” on page 16 for a view of the entire NewsBrowse
system.
To do the basic configuration and testing of the encoder plus server, do the following:
1. “Configure Media Frame Core ASK: ISS” on page 80
2. “Configure Rules Automation: ISS” on page 81
3. “Test: ISS + Server stage” on page 82
4. “Checklist: ISS + Server stage” on page 83
Configure Media Frame Core ASK: ISS
Make sure the ISS’s Proxy Transfer service is registered with the ASK software
component as a “Transfer” device, as explained in
“Configure Media Frame Core
ASK: Register components” on page 47 .
NewsBrowse Server
clk
clk
mpg
1-Channel
Encoder
Image
Support
Server
Production Network
MDI Server
mpg th/sb
th/sb
TC
Network Attached
Storage
mpg