Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 29)

25 May 2004 NewsBrowse Installation and Configuration Guide 29
Chapter
3
Configuring the NewsBrowse System
You can use the topics in this chapter in the following ways:
• Initial configuration — After your NewsBrowse system components are rack
mounted, cabled, and the physical installation process is complete, continue with
the configuration instructions in this chapter to create a working system. You can
follow the
Basic path or the Advanced path through the core configuration stages,
as explained “Configuration overview” on page 30 .
• Customizing — After the system is functioning, you can go back to the
configuration pages and modify the settings documented in this manual as
Advanced
!
to customize the system to fit any special workflow requirements.
The topics in this chapter include the following:
• “Configuration overview” on page 30
• “Establish conventions” on page 31
• “Configure network: Two tier” on page 36
• “Prepare for core configuration stages” on page 40
• “Stop NewsBrowse services” on page 46
• “ASK registration stage” on page 46
• “Encoder stand-alone stage” on page 49
• “Managed Device Interface (MDI) stage” on page 56
• “Encoder + Server stage” on page 64
• “Router Gateway stand-alone stage” on page 69
• “Router Gateway + Server stage” on page 72
• “Image Support Server (ISS) stand-alone stage” on page 75
• “ISS + Server stage” on page 80
• “Sequential encoder stand-alone stage” on page 84
• “Sequential encoder + Server stage” on page 89
• “EDL Export, Save, Conform stage” on page 93
• “Archive stage” on page 99
• “Deploy remaining machines for full system” on page 105
• “Add live monitor encoders” on page 105
• “Test system interactions with multiple machines” on page 106
• “Add NewsBrowse Clients” on page 107
• “Administering NewsBrowse user access” on page 110
• “Adding custom fields” on page 113
• “Testing NewsBrowse client operations” on page 115