Grass Valley NewsBrowse Desktop Browsing System Installation v.2.0 - Manual (Page 28)

28 NewsBrowse Installation and Configuration Guide 25 May 2004
Chapter 2 Installing NewsBrowse Machines
Router Gateway instructions
The NewsBrowse Router Gateway is the host platform for the Router Gateway
Service. The NewsBrowse system supports SMS7000 router control via SMS7000
Native Protocol over Ethernet, and supports Encore router controls via SMS7000
Native Protocol over Ethernet. This device is driven from the Ingest Scheduling
process on the NewsBrowse server. The Router Gateway lets NewsBrowse schedule
and control ingest services by communicating with your existing router, allowing you
to have more ingest feeds than NewsBrowse channels. The Router Gateway provides
the bridge between the NewsBrowse Network environment and the Audio/Video
Router Control environment.
The Router Gateway is an optional component of the NewsBrowse system. Systems
without a stand-alone Router Gateway platform can install the Router Gateway
software components on another NewsBrowse system platform, such as the MDI
server.
Platform Specifications:
• Pentium 3 1Ghz or better (1 or 2 CPU)
• 256 MB RAM
• CD-ROM Drive
• Minimum 20GB Program Drive
• Windows 2000 Workstation (SP3)
• .NET Framework (SP2)
• Internet Explorer 6 (SP1)
• 100Tx LAN (x2)
Cable as illustrated and as follows:
• Connect an Ethernet cable from the LAN1 port on the Router Control Gateway to
the NewsBrowse network switch.
• Connect an Ethernet cable from the LAN2 port on the Router Gateway to the
network where the Router Control system can be accessed.
Power
LAN
VGA cable
to KVM
Keyboard/mouse
port to pigtail
to KVM
port 1
port 2
LAN