Grass Valley KAM-XM-SERIES v.1.4.1 - Manual (Page 65)

KAM-XM-SERIES Instruction Manual 65
Configuration and Adjustments
Slot Config Web Page
Use the Slot Config web page ( Figure 40 ) to perform the following func-
tions on the module:
• Slot Identification – You may identify the module by typing a specific
name in the Name field. The assigned name is stored on the 2000NET
module and travels with the 2000NET module if it is moved to another
frame. Select
Default to enter the factory default module name.
• Locate Module – selecting Flash from the Locate Module pulldown flashes
the yellow COMM and CONF LEDs on the front of the module so it can
be located in the frame.
Figure 40. Slot Config Web Page
• Slot Memory – the slot configuration for each media module is automati-
cally saved periodically (once an hour) to the 2000NET module in that
frame. You may also select the
Learn Module Config button at any time to
save the current configuration for this slot. The configuration is saved
on the 2000NET module. If the 2000NET module is removed or
powered down, the stored configurations are not saved.
Use
this
link