Format web page – Grass Valley KAM-XM-SERIES v.1.4.1 User Manual
Page 44
44
KAM-XM-SERIES Instruction Manual
Configuration and Adjustments
Format Web Page
) provides the following con-
trols for the module:
•
Format Conversion
– in the Format Conversion display, the
Current
input
and output format are displayed. To change the input, use the Input
Desired
pulldown and select the format. If it is available a
Yes
will appear
in the
Available
column. Possible input and output formats, as well as the
defaults for an up and down converter are summarized in
Note
Changing the input or output format will cause the module to reload the appli-
cation. This will take approximately 60 seconds and a reloading message will
appear during this time. Select the Refresh button at the top of the page to
see the new settings after this time has elapsed.
Select the
Apply
button to set the values.
Note
All possible input and output values will be listed and can be selected in the
pulldowns. If the value does not apply to the application it will be reported as
not available.
•
Source Material
– select the type of source material being fed to the
module (
Video
or
Auto
). When set to
Auto,
the module will determine if
the input material is video or film originated and adjust the filtering
accordingly. In some situations, such as broadcast applications, where
the input material cannot be as easily interpreted by the module, the
user can force the mode to
Video
to prevent artifacts from occurring.
•
Deinterlace Type
– select the type of deinterlacing for the module (
PixelMo-
tion
or
Vert Interpolation
). Select
PixelMotion
for material that has motion or
Vert Interpolation
for images where motion is not a concern. Refer to
for more explanation on using a partic-
ular de-interlace type.
Use
this
link