Power up and module status, Power up and, Module status – Grass Valley KAM-XM-SERIES v.1.4.1 User Manual
Page 19
![background image](https://www.manualsdir.com/files/813869/content/doc019.png)
KAM-XM-SERIES Instruction Manual
19
Power Up and Module Status
Power Up and Module Status
The front LED indicators are illustrated in
.
Upon power-up, the green PWR LED should light.
Note
The KAM-XM module will take approximately 25 seconds to boot up.
Refer to
to see a complete list of possible operating con-
ditions and the resulting indicator status.
Figure 8. Front Edge LEDs Indicators
8
269_07
FAULT
COMM
CONF
GND
PWR
+3.3
SEQ
ACT
TC
PRSNT
AUD
PRSNT
FRM
LOCK
FBREF
ERR
UCREF
ERR
OFF
ERR
IFF
ERR
VOLT
TRIP
CH2
STAT
CH1
STAT
RESET
SEQ ACT (green)
TC PRSNT (green)
AUD PRSNT (green)
FRM LOCK (green)
FBREF ERR (red)
UCREF ERR (red)
OFF ERR (red)
IFF ERR (red)
VOLT TRIP (red)
CH1 STAT (yellow)
RESET (green)
FAULT (red)
COMM (yellow)
CONF (yellow)
PWR +3.3 (green)
This manual is related to the following products: