Grass Valley KAM-XM-SERIES v.1.4.1 - Manual (Page 17)

KAM-XM-SERIES Instruction Manual 17
Installation
KAM-XM-UPC
For a KAM-XM-UPC HDTV Up Converter, connect the SD signal to be up
converted to the IN (J2) BNC. Loop the signal from the LOOP (J1) BNC to
another destination if required.
Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device.
KAM-XM-UDC
For a KAM-XM-UDC HDTV Up/Down Converter, connect the SD signal
to be up converted or the HD signal to be down converted to the IN (J2)
BNC. Loop the signal from the LOOP (J1) BNC to another destination if
required.
Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device if up con-
verting or the SDTV device if down converting.
KAM-XM-UNC
For a KAM-XM-UNC HDTV Up Converter with advanced SDTV noise
reduction, connect the SD signal to be up converted to the IN (J2) BNC.
Loop the signal from the LOOP (J1) BNC to another destination if required.
Connect the OUT1 (J5) and OUT2 (J4) BNCs to the HDTV device.
KAM-XM-DNC
For a KAM-XM-DNC Down Converter, connect the HDTV signal to be
down converted to the IN (J2) BNC. Loop the signal from the LOOP (J1)
BNC to another destination if required.
Connect the OUT1 (J5) and OUT2 (J4) BNCs to the SDTV device.