Grass Valley K2 Summit Client v.9.2 - Manual (Page 7)

5. Run the following and wait for the process to complete:
ssave.bat
This saves current settings onto the USB Recovery Flash Drive in the \settings directory.
6. Disconnect the USB Recovery Flash Drive.
Next, do one of the following:
• If you are installing K2-XDP2-V9-FK on a K2 Summit 3G system with mSATA system drive,
skip ahead and reimage.
• If you are installing K2-XDP2-V9-FK on a K2 Summit/Solo system with CompactFlash system
drive, skip ahead and replace the CompactFlash boot media with the new larger 16GB CF.
• If you are installing K2-XDP2-CPU-FK on a K2 Summit system, replace the CPU carrier module.
Replace CPU carrier module
Do this task if installing K2-XDP2-CPU-FK on a K2 Summit system.
NOTE: Do not attempt to replace the CPU carrier module on a K2 Solo Media Server.
K2-XDP2-CPU-FK does not apply to K2 Solo Media Server.
1. Shutdown the K2 Summit system.
2. Disconnect all power cables from the K2 Summit system.
3. Press the power button on the K2 Summit system to drain off power from boards.
4. Remove any cables connected to the CPU carrier module.
5. Replace the current CPU carrier module with the new CPU carrier module.
6. Reconnect cables to the CPU carrier module.
7. Reconnect power cables.
Next, do one of the following:
• If you are installing K2-XDP2-V9-FK on a K2 Summit 3G system with mSATA system drive,
skip ahead and reimage.
• If you are installing K2-XDP2-V9-FK on a K2 Summit/Solo system with CompactFlash system
drive, replace the CompactFlash boot media with the new larger 16GB CF.
Related Topics
Carrier module removal on page 44
Replace CompactFlash boot media
Do not do this task if:
• A K2 Summit 3G system with mSATA system drive.
Do this task if:
• A K2 Summit/Solo system with CompactFlash system drive.
20140204 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 7
Installing software and CPU carrier module upgrades