Grass Valley K2 Summit Client v.9.2 - Manual (Page 31)

23. In K2Config, configure the server's File System Server page as follows:
• If a redundant K2 SAN, copy file system config settings from the redundant K2 Media Server,
as prompted by K2Config.
• If a basic (non-redundant) K2 SAN, launch Storage Utility, identify a disk, then exit Storage
Utility.
NOTE: Do not make a new file system.
K2Config does not allow you to proceed until you do these steps.
24. In K2Config, add SAN-attached K2 Summit systems and other K2 SAN clients.
25. Verify the server operates as expected.
26. Activate Windows within 30 days.
20140204 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 31
Upgrading a K2 Media Server to version 9.x