Grass Valley K2 Summit Client v.9.2 - Manual (Page 10)

Restore settings after generic reimage
Do this task for both software and CPU carrier module upgrade kits.
This task assumes that you have saved settings using ssave.bat before reimaging the K2
Summit/Solo system, and that the reimage (Acronis) process is complete.
NOTE: Do not attempt to use a single Recovery Flash Drive on multiple systems. This can
overwrite saved settings and lose the ability to restore settings on one or more systems. Also,
software licensing requires one Recovery Flash Drive for each system.
1. If you have not already done so, start up the K2 Summit/Solo system and log on with administrator
privileges.
The administrator password is adminGV! .
2. Connect the USB Recovery Flash Drive to a USB port on the K2 Summit/Solo system.
3. From the USB Recovery Flash Drive, run the following and wait for the process to complete:
Tools\SaveRestoreScripts\srestore.bat
Next, restore network configuration.
Restore network configuration
Do this task for both software and CPU carrier module upgrade kits.
Work through the tasks in this section sequentially to restore the default network configuration. As
you do so, refer to
C:\ipconfig.txt for the complete listing of the network settings that the K2
Summit/Solo system had before reimaging.
Create the Control Team
NOTE: Team control ports only. Do not team media ports.
1. Open Network Connections, if it is not already open.
a) From the Windows Start menu, in the Run or the Search programs and files box, type ncpa.cpl
and press Enter .
10 K2 Summit/Solo/Media Server Field Kit Upgrade Instructions 20140204
Installing software and CPU carrier module upgrades